Cold Hydraulic Pre-press/wood processing machinery

1.small volume,good appearance 2.wide application in wood-based pannel industry,specially for plywood manufacture. 3.Do OEM

1.The machine is used for Pre-pressing process of making plywood, blockboard and decorative board, small volume,handling,conveninet asemmbly.

2.in and out of gas hose adopts heat-resisting corrugated pipe,steel wire enhance hose ,use a long life cycle,is not easy to damage.

3.hydraulic device main components are installed in compressor top,cover a small area pipelines road aleady matched good before delivery ,dispense with spot configuration .

4. install basic shallow,deepest is not higher than 0.7MM.Bring convenience for cleaning,maintenance,and good safety .

5.small work power ,fast closing speed,simple structure,low cost.

6.good synchronicity,lift smoothlyand low failure rate,easy maintenance.

MAJOR TECHNICAL PARAMETERS

ITEM NO	DESCRIPTION	UNIT	SPECIFICATION
1	MAIN CYLINDER TOTAL PRESSURE	KN	5000
2	SIDE CYLINDER TOTAL PRESSURE	KN	140
3	MAIN CYLINDER RATED PRESSURE	MPa	21
4	LIFT CYLINDERRATED PRESSURE	MPa	14
5	CLOSING TIME	S	NO MORE THAN 25
6	FALLING TIME	S	NO MORE THAN 20

Factory

Mold

 Manufacture

Cold Hydraulic Pre-press/wood processing machinery