Woodworking Machinery /Pre-press

1.Welded by good quality steel plate 2.good appearance 3.wide application in wood-based pannel industry,specially for plywood

1. The machine is used for Pre-pressing process of making plywood, blockboard and decorative board.Parts small volume,handling,conveninet asemmbly.

2.in and out of gas hose adopt heat-resisting corrugated pipe,steel wire enhance hose ,use a long life cycle,is not easy to damage.

3.It has automatic hydraulic control system,accurate pressure control,high working efficiency.Hydraulic device main components are installed on top of the compressor ,cover a small area pipelines road aleady matched good before delivery ,dispense with spot configuration .

4. It has good quality cylinders,the main hydraulic parts are imported,so it has long working life.

5.shallow install basic ,deepest is not higher than 0.7MM.Bring convenience for cleaning,maintenance,and good safety .

6.small work power ,fast closing speed,simple structure,low cost.

7.good synchronicity,lift smoothlyand low failure rate,easy maintenance.

MAJOR TECHNICAL PARAMETERS

ITEM NO	DESCRIPTION	UNIT	SPECIFICATION
1	MAIN CYLINDER TOTAL PRESSURE	KN	5000
2	SIDE CYLINDER TOTAL PRESSURE	KN	140
3	MAIN CYLINDER RATED PRESSURE	MPa	21
4	LIFT CYLINDERRATED PRESSURE	MPa	14
5	CLOSING TIME	S	NO MORE THAN 25
6	FALLING TIME	S	NO MORE THAN 20

Woodworking Machinery /Pre-press